PRODUCT /
SPINDLE FINDER
| Application | Driven Series | Model | Housing OD (mm) | Max. Speed (rpm) | Taper | Clamping Force (kgf) | Nose | Bore Hole (mm) | Bearing ID (mm) | Lubrication | Motor Specification | Power S1 (kW) | Torque S1 (Nm) | Cooling | Weight (kg) | Option |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Milling | Motorized | RE3012 | Ø120 | 30000 | BT30/BBT30 | 250±50 | - | - | Ø45+Ø35 | Grease | ATE AC90/100/4 | 7.5 | 6 | Pure Water | Approx. 30 | CTS |
| Milling | Motorized | REH022 | Ø120 | 30000 | HSKE40 | 900±200 | - | - | Ø45+Ø35 | Grease/Oil-Air | ATE AC90/100/4 | 7.5 | 6 | Oil/Pure Water | Approx. 30 | CTS |
| Milling | Motorized | RE4121 | Ø150 | 20000 | BBT40 | 1000±100 | - | - | Ø70+Ø60 | Grease/Oil-Air | ATE AC120/120/4 | 15 | 12.1 | Pure Water | Approx. 82 | CTS |
| Milling | Motorized | REH063 | Ø150 | 24000 | HSKA63 | 2050±250 | - | - | Ø70+Ø55 | Grease/Oil-Air | ATE AC120/120/4 | 15 | 12.1 | Pure Water | Approx. 82 | CTS |
| Milling | Motorized | RE4122 | Ø170 | 20000 | BBT40 | 1260±60 | - | - | Ø70+Ø60 | Grease/Oil-Air | FANUC BiI 90L/25000 | 18.5 | 29.4 | Oil | Approx. 105 | CTS |
| Milling | Motorized | REH112 | Ø170 | 24000 | HSKA63 | 2050±250 | - | - | Ø70+Ø60 | Oil-Air | FANUC BiI 90L/25000 | 18.5 | 29.4 | Oil/Pure Water | Approx. 105 | CTS |
| Milling | Motorized | REH040 | Ø170 | 20000 | HSKA50 | 1300±200 | - | - | Ø60+Ø55 | Grease | FANUC BiI 100S/20000 | 11 | 14 | Oil/Pure Water | Approx. 120 | CTS |
| Milling | Motorized | REH069 | Ø170 | 24000 | HSKA63 | 2050±250 | - | - | Ø70+Ø55 | Grease/Oil-Air | FANUC BiI 90L/25000 | 18.5 | 29.4 | Oil | Approx. 135 | CTS |
| Milling | Motorized | RE4064 | Ø210 | 20000 | BBT40 | 1260±60 | - | - | Ø70+Ø55 | Grease | SIEMENS 1FE 1083-4WN11 | 24.8 | 63 | Pure Water | Approx. 160 | CTS |
| Milling | Motorized | REH020 | Ø210 | 20000 | HSKA63 | 2050±250 | - | - | Ø70+Ø55 | Grease/Oil-Air | SIEMENS 1FE 1083-4WN11 | 24.8 | 63 | Pure Water | Approx. 160 | CTS |
| Milling | Motorized | RE4114 | Ø230 | 20000 | BBT40 | 1260±60 | - | - | Ø70+Ø60 | Oil-Air | FANUC αB112L/20000i(220V) | High Winding 18.5 Low Winding 11.3 | High Winding 27.2 Low Winding 86.8 | Oil | Approx. 230 | CTS |
| Milling | Motorized | RE4114 | Ø230 | 20000 | BBT40 | 1260±60 | - | - | Ø70+Ø60 | Oil-Air | ATE AC180/260/4(380V) | 26 | 123.5 | Oil | Approx. 230 | CTS |
| Milling | Motorized | REH099 | Ø230 | 20000 | HSKA63 | 2050±250 | - | - | Ø70+Ø60 | Oil-Air | FANUC αB112L/20000i(220V) | High Winding 18.5 Low Winding 11.3 | High Winding 27.2 Low Winding 86.8 | Oil | Approx. 230 | CTS |
| Milling | Motorized | REH099 | Ø230 | 20000 | HSKA63 | 2050±250 | - | - | Ø70+Ø60 | Oil-Air | ATE AC180/260/4(380V) | 26 | 123.5 | Oil | Approx. 230 | CTS |
| Milling | Motorized | RE5007 | Ø250 | 10000 | BBT50 | 1900±100 | - | - | Ø100+Ø70 | Grease/Oil-Air | FANUC BiI132L/14000 | High Winding 22 Low Winding 15 | High Winding 41.6 Low Winding 159 | Oil | Approx. 270 | CTS |
| Milling | Motorized | RE5025 | Ø310 | 12000 | BBT50 | 2400±100 | - | - | Ø100+Ø70 | Oil-Air | FANUC aB160LL/13000i | High Winding 26 Low Winding 18.5 | High Winding 99.3 Low Winding 305 | Oil | Approx. 410 | CTS |
| Milling | Motorized | REH104 | Ø310 | 10000 | HSKA100 | 5150±650 | - | - | Ø100+Ø70 | Oil-Air | FANUC aB160LL/13000i | High Winding 26 Low Winding 18.5 | High Winding 99.3 Low Winding 305 | Oil | Approx. 410 | CTS |
| Milling | Direct-Drive | RD3068 | Ø100 | 24000 | BT30 | 250±50 | - | - | Ø40 | Grease/Oil-Air | - | - | - | Oil | Approx. 38 | CTS |
| Milling | Direct-Drive | RD3006 | Ø120 | 18000 | BT30 | 350±50 | - | - | Ø60 | Grease | - | - | - | Oil | Approx. 38 | CTS |
| Milling | Direct-Drive | RD4172 | Ø120 | 15000 | BT40/BBT40 | 900±100 | - | - | Ø60 | Grease | - | - | - | Oil | Approx. 38 | CTS |
| Milling | Direct-Drive | RDH085 | Ø120 | 15000 | HSKA63 | 2050±250 | - | - | Ø60 | Grease | - | - | - | Oil | Approx. 38 | CTS |
| Milling | Direct-Drive | RD4152 | Ø150 | 18000 | BT40/BBT40 | 1200±100 | - | - | Ø70 | Grease | - | - | - | Oil | Approx. 60 | CTS |
| Milling | Direct-Drive | RDH060 | Ø150 | 18000 | HSKA63 | 2050±250 | - | - | Ø70 | Grease | - | - | - | Oil | Approx. 60 | CTS |
| Milling | Direct-Drive | RD4014 | Ø155 | 15000 | BT40/BBT40 | 1000±100 | - | - | Ø70 | Grease | - | - | - | Oil | Approx. 80 | CTS |
| Milling | Direct-Drive | RDH025 | Ø155 | 15000 | HSKA63 | 2050±250 | - | - | Ø70 | Grease | - | - | - | Oil | Approx. 80 | CTS |
| Milling | Direct-Drive | RD5012 | Ø155 | 10000 | BT50/BBT50 | 1500±100 | - | - | Ø80 | Grease | - | - | - | Oil | Approx. 70 | CTS |
| Milling | Direct-Drive | RD5002 | Ø190 | 12000 | BT50/BBT50 | 1800±100 | - | - | Ø90 | Grease | - | - | - | Oil | Approx. 112 | CTS |
| Milling | Direct-Drive | RDH061 | Ø190 | 12000 | HSKA100 | 5150±650 | - | - | Ø90 | Grease | - | - | - | Oil | Approx. 112 | CTS |
| Milling | Direct-Drive | RD5059 | Ø200 | 12000 | BT50/BBT50 | 1800±100 | - | - | Ø100 | Grease/Oil-Air | - | - | - | Oil | Approx. 134 | CTS |
| Milling | Direct-Drive | RDH008 | Ø200 | 12000 | HSKA100 | 5150±650 | - | - | Ø100 | Grease/Oil-Air | - | - | - | Oil | Approx. 134 | CTS |
| Milling | Belt-Drive | RB3002 | Ø100 | 15000 | BT30 | 300±50 | - | - | Ø50 | Grease | - | - | - | Oil | Approx. 17 | CTS |
| Milling | Belt-Drive | RB3021 | Ø120 | 15000 | BBT30 | 300±50 | - | - | Ø60 | Grease | - | - | - | Oil | Approx. 20 | CTS |
| Milling | Belt-Drive | RB4006 | Ø120 | 12000 | BT40 | 700±50 | - | - | Ø60 | Grease | - | - | - | Oil | Approx. 33 | CTS |
| Milling | Belt-Drive | RB4002 | Ø150 | 12000 | BT40/BBT40 | 1000±100 | - | - | Ø70 | Grease | - | - | - | Oil | Approx. 56 | CTS |
| Milling | Belt-Drive | RBH004 | Ø150 | 12000 | HSKA63 | 2050±250 | - | - | Ø70 | Grease | - | - | - | Oil | Approx. 56 | CTS |
| Milling | Belt-Drive | RB4078 | Ø155 | 12000 | BT40/BBT40 | 1000±100 | - | - | Ø70 | Grease | - | - | - | Oil | Approx. 60 | CTS |
| Milling | Belt-Drive | RBH018 | Ø155 | 12000 | HSKA63 | 2050±250 | - | - | Ø70 | Grease | - | - | - | Oil | Approx. 60 | CTS |
| Milling | Belt-Drive | RB5002 | Ø155 | 8000 | BT50/BBT50 | 1500±100 | - | - | Ø80 | Grease | - | - | - | Oil | Approx. 70 | CTS |
| Milling | Belt-Drive | RB5004 | Ø190 | 10000 | BT50/BBT50 | 1800±100 | - | - | Ø100 | Grease | - | - | - | Oil | Approx. 123 | CTS |
| Milling | Belt-Drive | RB5029 | Ø200 | 10000 | BT50/BBT50 | 1800±100 | - | - | Ø90 | Grease | - | - | - | Oil | Approx. 130 | CTS |
| Milling | Gear-Drive | RT4002 | Ø150 | 8000 | BT40 | 1000±100 | - | - | Ø70 | Grease | - | - | - | Oil | Approx. 65 | CTS |
| Milling | Gear-Drive | RT5006 | Ø190 | 8000 | BT50 | 1800±100 | - | - | Ø100 | Grease | - | - | - | Oil | Approx. 110 | CTS |
| Turning | Motorized | REA506 | Ø185 | 6000 | - | - | A2-5 | 56.5 | Ø90+Ø75 | Grease | SOLPOWER 160x110x220 | 11 | 74.9 | Oil | Approx. 250 | Brake Disc |
| Turning | Motorized | REA813 | Ø340 | 4000 | - | - | A2-8 | 91 | Ø140+Ø115 | Grease | ATE AC270/250/8 | 22 | 477.5 | Oil | Approx. 360 | Brake Disc |
| Turning | Belt-Drive | RA4007 | Ø150 | 8000 | - | - | A2-4 | 45 | Ø70 | Grease | - | - | - | - | Approx. 47 | Brake Disc / Encoder |
| Turning | Belt-Drive | RA5005 | Ø170 | 6000 | - | - | A2-5 | 56 | Ø80 | Grease | - | - | - | - | Approx. 75 | Brake Disc / Encoder |
| Turning | Belt-Drive | RA6023 | Ø200 | 5000 | - | - | A2-6 | 66 | Ø100+Ø90 | Grease | - | - | - | - | Approx. 90 | Brake Disc / Encoder |
| Turning | Belt-Drive | RA8001 | Ø260 | 3500 | - | - | A2-8 | 92/98 | Ø130+Ø120 | Grease | - | - | - | - | Approx. 200 | Brake Disc / Encoder |
| Turning | Belt-Drive | RA1113 | Ø286 | 2800 | - | - | A2-11 | 117.5 | Ø160+Ø150 | Grease | - | - | - | - | Approx. 313 | Brake Disc / Encoder |
| Turning | Belt-Drive | RA1503 | Ø400 | 1000 | - | - | A2-15 | 184 | Ø240+Ø220 | Grease | - | - | - | - | Approx. 610 | Brake Disc / Encoder |
| Mill-Turn | Motorized | REH128 | Ø210 | 15000 | HSKA63 | 2000±250 | - | - | Ø70 | Grease | ATF IM160/170/6(380V) | 28.3 | 60.1 | Oil | Approx. 170 | CTS |
| Mill-Turn | Motorized | REH098 | Ø235 | 15000 | HSKA63 | 2000±250 | - | - | Ø70 | Grease | SIEMENS 1FE 1093-4WN11 | 28 | 75 | Oil | Approx. 170 | CTS |
| Mill-Turn | Direct-Drive | RD4187 | Ø150 | 12000 | BBT40 | 1260±60 | - | - | Ø70 | Grease | - | - | - | Oil | Approx. 58 | CTS |
| Multi-Spindle | Motorized | RE4125 | Ø210 | 15000 | BBT40 | 1200±100 | - | - | Ø70 | Grease | ATE AC160/170/8(380V) | 15 | 71.6 | Oil | Approx. 152 | CTS |
| Multi-Spindle | Motorized | REH128 | Ø210 | 15000 | HSKA63 | 2000±250 | - | - | Ø70 | Grease | ATF IM160/170/6(380V) | 28.3 | 60.1 | Oil | Approx. 170 | CTS |
| Multi-Spindle | Motorized | REH098 | Ø235 | 15000 | HSKA63 | 2000±250 | - | - | Ø70 | Grease | SIEMENS 1FE 1093-4WN11 | 28 | 75 | Oil | Approx. 170 | CTS |
| Tapping | Direct-Drive | RD3018 | Ø100 | 24000 | BT30/BBT30 | 250±20 | - | - | Ø40 | Grease/Oil-Air | - | - | - | Oil | Approx. 16 | CTS |
| Grinding | Direct-Drive | RG0024 | Ø130 | 3000 | - | - | - | - | Ø65 | Grease | - | - | - | - | Approx. 80 | - |
While listed models are standardized catalog spindles, customized spindle specifications are available. Welcome to contact us for your individually customized designs for any use.